Leaks & Service Repairs

757-399-3066 ext 3 (Leaks & Service Repairs)

Reroof Estimates & Inspections

757-399-3066 ext 1 (Reroof Estimates & Inspections)

Tag: water stain on ceiling

What’s Actually Staining Your Roof and What to Do About It

After a long, humid summer, it’s not unusual to notice dark streaks on your roof or a few green patches.

And if you look around, you’re likely to see it on your neighbors’ roofs as well. Staining is one of the most common issues homeowners in our humid, coastal Virginia climate have with their roofs. But before you climb up a ladder to take care of it yourself or pay someone a bunch of money to clean it up for you, let’s dive more deeply into what it is, how it affects your roof, and the best way to deal with it.

What exactly is it?

Roof staining usually comes from one of three things, and it’s common to have more than one at the same time.

Dark streaks. These are the black or brownish stripes that look like soot or dirt running down the roof. They’re typically caused by cyanobacteria, which most people (and most roofers) simply call algae. Early on, this is mostly a cosmetic issue.

Green, fuzzy patches. This is moss. It tends to grow in thick cushions, usually in shaded spots or along the lower edges of the roof. Moss behaves differently than streaking because it holds moisture against the roof surface.

Flat, crusty spots. Gray, green, or orange patches that look almost painted onto the shingles are lichen. They hold on tightly and grow slowly, which makes them harder to remove than the other two.

You don’t need to identify each one perfectly to know what to do next. What matters is how long it has been there and whether it has started affecting the shingles underneath.

Why Hampton Roads roofs are so impacted

Our region is the perfect place for these organisms to live and thrive. Humidity stays high for much of the year. We get regular rain and heavy morning dew. Winters are mild enough that growth never fully stops. And between the mature oaks and pines, plenty of roofs spend part of the day in shade, which slows drying.

Wind plays a role too. Spores travel from roof to roof, which is why staining often seems to move through an entire neighborhood. Homes near the water or marsh, where the air stays damp longer, tend to see it sooner and more heavily.

All that said, you may look around and see half the houses in your neighborhood show signs of this staining, and half don’t. Two houses on the same street can look very different for a few reasons:

  • Shingle makeup. Many asphalt shingles contain limestone filler, which these organisms can feed on.
  • Sun exposure. Shaded slopes, and often the north-facing side, stay damp longer and show growth first.
  • Color. Streaks are much more obvious on light-colored roofs than on dark ones, even when the growth is similar.
  • Material. Metal roofs are far more resistant, though growth can still collect in shaded valleys and around laps.

Does the staining really matter?

The honest answer depends on how long it has been there and what’s growing. Dark streaking by itself rarely causes leaks. It affects curb appeal, and in some neighborhoods, it can draw attention from the HOA. Dark streaks also absorb a bit more heat than a clean roof, though the effect on your energy bills is small.

Moss and lichen are a different story over time. Moss can lift the edges of shingles and let water work its way underneath. Growth that sticks around for years can contribute to granule loss, which shortens the life of the shingles. While none of this is going to destroy your roof overnight, it’s also not a great idea to ignore it for years on end.

Signs the problem has gone beyond surface staining:

  • Shingles that are curling, lifting, or cracking
  • Bare or thinning spots where granules have worn away
  • A noticeable amount of granules collecting in your gutters or at the downspouts
  • Soft or spongy areas found during a roof inspection
  • Water stains on ceilings or in the attic

If any of those sound familiar, it’s time to have a roofer take a look.

Preventing roof staining

Prevention is where homeowners have the most control as well as the most options, depending on your home’s specific scenario. Here are a few ways to combat the stains.

Algae-resistant shingles. Many manufacturers build copper-containing granules into their shingles to discourage growth. If you’re planning a roof replacement, ask about this option. Algae resistance warranties are typically limited to a set number of years and vary by manufacturer, so understand the details.

Copper or zinc strips. Installed along the ridge, these strips release trace metal ions when it rains. The ions wash down the roof and discourage growth. They protect the area below them best, so long roof slopes may not see the benefit all the way to the edge.

Trim back the trees. More sunlight and airflow mean a faster-drying roof. Cutting back overhanging branches also reduces the debris that holds moisture against the shingles.

Keep water moving off the roof. Clogged gutters let water sit at the roof edge, which is exactly where moss likes to start.

Can you clean it?

Plenty of homeowners want to simply wash it off, but it’s not always that simple.

High-pressure washing is hard on shingles. It can strip away the granules that protect the roof and may affect your warranty. The gentler option is soft washing, which uses low pressure and a roof-safe cleaning solution. It’s best left to a company that cleans roofs regularly. DIY attempts with bleach and a ladder can damage landscaping, stain siding, corrode metal, and put you at risk on a wet, slick surface.

It’s also worth noting that while cleaning removes what’s there now, it doesn’t stop it from coming back. Without a prevention step, the growth usually returns.

When to call a roofer

If you’ve noticed staining on your shingles, but everything else looks and seems OK, you likely have time to plan. Trimming trees, clearing gutters, and finding a reputable roof cleaner is a reasonable place to start.

If the growth has led to damage, like lifted shingles, worn spots, or leaks, that’s where a licensed roofing contractor needs to come in. At Andrews Roofing, we handle roof repairs and replacements due to a variety of issues and are familiar with those most common in Hampton Roads. If you’re due for a new roof, we’re happy to talk through options that can help keep this from happening again, so contact us today.

read more

Seven Reasons that Leak May Not Be Your Roof’s Fault

When you spot a water stain on the ceiling, your first thought is probably that your roof has a leak which is a reasonable assumption and often correct.

But a surprising number of leaks in Hampton Roads homes and businesses trace back to something other than a failed shingle, membrane, or flashing system.

Practically, however, you should still call a professional roofer first. Diagnosing a leak takes training and experience, and a reputable company will tell you exactly what they find, even when the answer is “it’s not us” or “we can’t help you.” Understanding some of the other common leak sources can help you go into that conversation informed, and it can save you time if the fix ends up requiring a different kind of specialist. Here are seven reasons why your roof might not be the problem.

Gutters and Drainage

Water can enter your house in more ways than one, and it’s not always because of a hole or puncture. Overflowing gutters at the eaves are one of the most common non-roof leak sources. When gutters clog with leaves and debris, or when they’re installed incorrectly, water backs up and spills over the edge instead of flowing through the downspouts. That water then runs down your siding, seeps behind fascia boards, or pools against your foundation. Inside the house, it can show up as a stain on your exterior walls or ceiling corners, which makes it easy to mistake for a roofing problem.

The fix is often as simple as a thorough gutter cleaning and a check of the gutter’s pitch, hangers and downspouts. A roofing company can usually handle this directly, since gutters and roofs work as a system.

Debris Buildup on the Roof Surface

Shingle roofs are designed to shed water quickly, but that’s only if there’s a clear path. Piled-up leaves, pine needles, and other debris in valleys or along the roofline can dam up water and force it to sit rather than drain. Standing water on a shingle roof, even for a short time, increases the odds it finds a way underneath the shingles through a seam or a nail hole that would otherwise never be an issue.

This issue comes down to maintenance, rather than repair. Regular debris removal, especially after the fall when the leaves have dropped, or after a big storm, keeps water moving the way it’s supposed to.

Rooftop AC Units

Commercial buildings and some homes with rooftop-mounted HVAC equipment have a built-in leak source in their heating and cooling system’s condensate lines and drain pans. AC units generate a lot of condensation, which is why it has a built in system for expelling that water. However, if a condensate line is clogged or a drain pan has rusted through, water can pool right on the roof surface or drip directly into the building.

This is a case where a roofing company usually can’t fix the issue alone, and an HVAC company will need to be called in. What a roofer can do is inspect and repair the roofing membrane or flashing around the unit in the event that it’s been damaged from the water exposure. Best results usually come from the two trades coordinating rather than working in isolation.

Inadequate Attic Ventilation

Not all “leaks” come from the outside! Sometimes it’s moisture that never left. Attics with poor ventilation trap warm, humid air, especially here in Hampton Roads where summer humidity is no joke. That trapped moisture condenses on the underside of the roof deck and drips down, mimicking the signs of a leak, even when the roofing system is in perfect working order.

A roofing company can evaluate whether your attic has enough intake and exhaust ventilation and recommend upgrades like ridge vents, soffit vents, or additional attic fans. This repair or upgrade will usually fall under a roofing company’s purview, since they’re well trained in ventilation and how to improve it.

Chimneys, Pipes, and Penetrations

Anywhere something pokes through your roof is a potential entry point for water, and in this case a roofing company should be able to handle the fix. Flashing around chimneys, plumbing vent pipes, and other penetrations can come loose, or even rust out and wear down over time, creating one of the most common actual roof-related leak points. Often homeowners assume leaks that pop up around their fireplace and chimney are caused by cracked masonry or a bad cap, but often the culprit is actually the flashing where the chimney meets the roof deck. A mason may need to get involved if the chimney structure itself has cracks or deteriorating mortar joints. But the flashing repair is standard roofing work.

Siding, Window Seals, and Dormers

Water doesn’t care if the opening is in the roof, window or wall. Failed or damaged caulking around window seals, gaps in siding, or bad dormer flashing can all let water in above the ceiling line, which makes it look exactly like a roof leak from inside the house. Dormers are especially tricky because they combine roof, wall, and window elements in one small area, giving water multiple potential entry points. Depending on what’s found, you may need to call in a siding or window company. A good roofer will tell you clearly where the roofing system ends and where another trade’s scope begins.

Believe It or Not: Bullet Holes

It may sound unbelievable, but it happens more often than you’d think, particularly on commercial flat roofs. If a membrane roof experiences a small, isolated leak, it is occasionally (but more than once in our experience!) because of a bullet lodged in the membrane from a stray round fired somewhere in the surrounding area. The good news is these are usually simple, inexpensive fixes once identified. While an unusual leak diagnosis, it’s not impossible. Fortunately, a roofing company with experience in commercial roofing materials should be able to patch it up in no time.

Leave the Diagnosis to the Professionals

If you’ve got a leak, call a professional roofing company first. A reputable contractor will inspect thoroughly and tell you honestly what they find, whether that’s a roofing repair, a referral to another trade, or a case where both need to work together. Don’t be surprised if the answer isn’t what you expected. Sometimes “it’s not your roof” is good news, since gutters, ventilation, and window seals are often quicker and less expensive fixes than a roofing repair would be. But no matter what you think the cause is, stay safely on the ground and let the professionals figure it out.

If you’re dealing with a leak anywhere in Hampton Roads, contact Andrews Roofing today. We’ll get to the bottom of it, even if the answer isn’t us.

read more