Leaks & Service Repairs

757-399-3066 ext 3 (Leaks & Service Repairs)

Reroof Estimates & Inspections

757-399-3066 ext 1 (Reroof Estimates & Inspections)

Tag: leak

Where is That Roof Leak Coming From?

If your roof is not well-maintained, there is a whole list of issues that could occur, including structural damage and unhealthy mold growth. If you have noticed water stains or actual water coming from the ceiling, you might have a leak. Immediately repairing leaks is essential to keeping your roof in the best condition, but how do you know where the leak is coming from? The following are some common problem areas you can check to find your residential roof leak.

Shingles and Other Materials

The actual shingles or other roofing materials on your roof could have damage that is allowing moisture into your home. Damaged shingles will be buckled, corroded, cracked, or missing all together. You could also look for granules on the ground surrounding your home or nails that are missing or backing out. If you have trees that hang over the roof, be sure to check those areas, as a swaying branch could easily wear out your roofing.

Flashing

The point of flashing is to guide water in another direction when it wants to seep down into a seam on the roof. Flashing is located around chimneys, vents, and other areas where there’s an intersection or an angle in the roof. When flashing is not properly installed or sealed, water will begin to flow underneath and damage your home. Look for loose flashing, ripped pieces, or missing areas.

Skylights and Chimneys

The more extra features you have on your roof, the more chances water has to get in. Skylights and chimneys can be both functional and aesthetically appealing, but without proper installation, it’s easy for water to penetrate the roofing materials surrounding them. You should have a professional look at the seams and the installation to make sure it is all sealed correctly.

Hiring the Professionals

If you’re worried about a leaky residential roof, it’s important you contact the professionals for an inspection. Contact Andrews Roofing today by calling 757-296-0553 or sending us an email to learn more.

read more

Common Maintenance Steps for Your Commercial Flat Roof

A flat roof is an excellent option for a commercial roof. Not only is it long lasting, but it can also hold your commercial air conditioners and other utilities. Make the most of your investment and prevent emergency repairs by following these common maintenance steps.

Trim Surrounding Trees

Nearby trees can increase the risk of damage to your flat roof. Not only can a tree or a limb potentially fall on your commercial building, but falling leaves and increased shade can reduce the lifespan of your roof. Have a professional trim back trees before they damage your flat roof.

Prevent Pooling Water

Flat roofs still need to efficiently drain water. Pooling water on your flat roof can slowly leak into your building. Be sure to clear off any standing water on your commercial roof and have a professional check for adequate drainage. Large amounts of water may have already compromised your roof, so consider hiring a professional to safely remove standing water.

If pooled water does start to leak through your flat roof, you need to address the leak immediately. Hire a professional roofing team to inspect the damage and provide a safe, effective patch to prevent further water damage.

Clear Off Debris

Twigs, leaves, and other debris may not seem like a major issue on your flat roof, but over time all this debris can retain moisture and encourage pooling. Prevent water pooling and other flat roof damage by routinely clearing off your commercial flat roof.

Hire a Professional Inspector and Maintenance Team

The best way to maintain your commercial flat roof is to invest in routine inspection and maintenance services. Some issues are difficult to spot without experience working with flat roofs, so contact Andrews Roofing today to receive a comprehensive inspection. Discuss any maintenance issues and discover how you can save money and avoid a complete flat roof replacement with proper maintenance. Call 757-296-0553 or email us today to learn more!

read more

Common Issues Caused by Leaks in Your Commercial Roof

Your roof is a critical part of your commercial building. If your commercial roof is compromised in any way, it can lead to exponential costs and headaches in the future. Whether you own your business location, an apartment complex, or office building, understanding potential issues is critical. Learn more about these common issues caused by a leaking roof.

Mold Growth

The first thing that will happen when a roof leaks is that water will enter your roofline and begin to soak into interior elements. Very quickly, this will cause mold growth. Mold only needs a few basic features in order to start growing in your building:

  • Moisture
  • Heat
  • A food source

Some common food sources for mold are drywall and carpeting, but mold and mildew can grow on the grout of a bathroom floor, on your insulation, and even on the wood frame of your building.

Rotting Wood

As mold grows and moisture soaks into your wood support beams, it could reduce the strength of your entire support structure. Over time, it could create a dangerous situation. From a sagging roof line to a complete collapse of your commercial roof, it’s best to prevent water damage before your framing begins to rot.

Compromised Insulation

Finally, a leak in your roof could cause your insulation to become wet. Most buildings are insulated with fiberglass insulation. This insulating material uses air pockets between the fibers to create a heat barrier. When exposed to water, fiberglass insulation will become heavy and crumple. Not only will this reduce its insulating properties, it could add significant weight to your commercial ceiling, creating a dangerous situation.

Don’t let a lack of maintenance or prompt repairs compromise your roof. Contact Andrews Roofing today to have your commercial roof inspected, repaired, or replaced. Protect your investment and ensure a reliable water barrier for years to come by calling 757-296-0553 or emailing us today!

read more

Avoid These DIY Roofing Hazards

DIY projects are all the rage, and some can certainly save homeowners a significant amount of money. However, residential roofing is an area that’s best left to the professionals. If you’re considering repairing or replacing your own roof, here are some common hazards that might make you reconsider a project of this scope.

Leaking Roof

Improper installation of roofing elements can create an ineffective roof. While nailing asphalt shingles may look straightforward, you’ll need to carefully install underlayment and flashing in order to create a leak-free roof. It’s very easy to create gaps, holes, and other imperfections that can create major headaches later on as your roof begins to leak.

Personal Injury

Perhaps the biggest hazard when tackling DIY roofing is personal injury. There are a number of dangerous situations you may get yourself into. Here are just a few ways that you could be injured while attempting to work on your own roof:

  • Improper use of tools
  • Falling through weak points in your roof
  • Losing awareness of your roof edge
  • Slipping on a steep roof pitch

Many of these issues are particularly dangerous if you have a two-story house. Even proper personal protective equipment doesn’t offer adequate protection for falls, improper use of nail guns, and other hazards.

Additional Expenses

In the end, many homeowners find they actually invest more in a DIY roofing project. From the significant time devoted to the added materials required to fix any mistakes, you may have more invested than a straight-forward professional project. Spend your weekends and evenings relaxing or working on another, more manageable home improvement project.

If you need to replace your roof, don’t risk your time, money, and personal health attempting a DIY solution. Contact Andrews Roofing today to receive a quote. Discover how safely and affordably you can enjoy a professional roof replacement and avoid the time, effort and risk of a DIY project. Call 757-296-0553 or email us today!

read more

How to Maintain an Industrial Roof

When it comes to your building, there are few components as important as the roof. The roof provides safety from the elements and adds structural integrity. If you are unfamiliar with industrial roofs, you may not know the unique needs that they present. Here is what you need to know.

Semi-Annual Inspections Are Necessary

In order to maintain your roof, you need to schedule an inspection at least twice a year. In addition, you want to schedule inspections after any severe weather event. These inspections will analyze the roof and roof components’ condition, as well as leave you with a report of any problems. When you have a semi-annual inspection, you can catch problems quickly. This will provide you with the means to take care of maintenance and repairs as soon as possible.

Maintenance Is Necessary

When you neglect an industrial roof, it deteriorates quickly. As it deteriorates, it can leak and the water will damage the underlying support system, decay the structure, and harm electrical systems. The chain of events that might develop when you neglect maintenance can be severe. Some businesses can lose their inventory and equipment due to leaking water. When you own an industrial building, you have to schedule regular maintenance.

Repairs and Maintenance Are a Priority

After an inspection, it is crucial that you schedule maintenance right away. For instance, say that you have open seams or punctures. These problems increase in severity over time. You need to ensure that you take care of everything as quickly as you can. This also goes for less serious maintenance. Do not let your problem turn into something more serious.

Industrial roofs are different from residential roofs. If you are used to maintaining a residential roof, you still need to pay special attention to the unique needs of an industrial roof. For more information about your industrial roof and maintenance, contact Andrews Roofing by calling 757-296-0553 or emailing us today!

read more

How Warm Weather Affects Flat Roofs

Your building relies on the structural integrity of your roof. When it comes to roof damage, most building owners worry about extreme storm systems or snowy winters. Few regard summer as a problem to their roofing, which is a mistake. Hot summer days can negatively affect your flat roof. Here is what you need to know about warm weather and the affects it has on your roof.

Thermal Cycle Problems

In the summer, the temperatures rotate between hot and cold throughout the day and night. Flat style roofs expand and contract in these conditions. This usually leads to water penetrating the roof. You may need breathable PVC material to withstand the condensation and the thermal cycles.

Blistering Issues

When water penetrates through the roof, this is a problem on its own. It only gets worse when you add the summer heat into the mix. When you heat the moisture under the sun all day, it can lift the felt from the roof. This will lead to bubbles or blisters in the roof. If you catch these blisters as soon as possible, then you can replace the damaged sections. However, as time goes on and more blisters develop, you would need to replace the entire roof.

Moisture Damage

When moisture builds up, mold and fungus might grow. When you add sunlight into the mix, the high temperatures can help increase the rate of mold growth. This fungus may damage flashing. If you have damaged flashing, this compromises your draining capacity.

Older roofs and those that endure high temperatures should have regular inspections. When you have a roofing issue, you never want to wait around on it. Most roofing problems get worse with time, whereas maintenance may be simple and quick. With a call to Andrews Roofing today, you can avoid turning those minor problems into major problems. Call 757-296-0553 or email us today!

read more

Facebook

Andrews Roofing

Family owned and operated, Andrews Roofing provides reliable commercial, residential and industrial roofing services. We serve the Hampton Roads area including: Portsmouth, Norfolk, Chesapeake, Suffolk, Newport News, Hampton, Smithfield VA and the NC Outer Banks. We don’t just roof buildings, we shelter lives. Andrews Roofing Company was founded by Robert Andrews II. His father, Bob Andrews, is vice president and has over 35 years of residential and commercial construction experience. Because we are an owner-operated business, we believe in working with each client to ensure that they are treated like “part of our family.” We handle each job as if it were our own. You work directly with us each step along the way. The desired result, like family, we want you to be happy and we want you to come back.
Andrews Roofing
Andrews Roofing
Why Architectural Shingles Are So Popular -

If you are researching having your roof replaced and are becoming confused or overwhelmed by all the different options, you’re not alone.
There are a myriad materials and styles available, but living in a beachside region like Hampton Roads creates an additional requirement of roofing materials being storm and weather resistant. If you’ve done any research, you’ve no doubt run across asphalt shingles and “architectural shingles” as popular options. But what is the difference, and which is right for your home? Let’s start from the beginning.

https://andrewsroofing.com/why-architectural-shingles-are-so-popular/