Leaks & Service Repairs

757-399-3066 ext 3 (Leaks & Service Repairs)

Reroof Estimates & Inspections

757-399-3066 ext 1 (Reroof Estimates & Inspections)

Category: Flat Roof

Should I Worry About Frost on My Roof?

Have you ever walked outside on a cold morning and noticed the frost that covers the ground? You might have to scrape your car before you can drive, and your grass may look like a sparkling wonderland. Direct your view upward to have a look at the roof. Is there frost on it? Do you know whether frost is good or bad for your residential roof? How do you know when to worry?

Is Frost Good or Bad?

The frost itself that collects on your roof isn’t necessarily good or bad. Roofing materials are made to withstand the weather, and roofers who work in cold environments know which materials will hold up best. As long as your roof is in good repair, you shouldn’t have to worry about water damage.

The fact that there’s frost on your residential roof could actually be a good thing. If you look around and notice all your neighboring houses have frost, but yours does not, it could be an indication that your attic insulation isn’t quite up to par. The frost may be spotty, which also means the insulation isn’t properly in place. Without proper insulation, the heat that should be warming your home is leaking out through the attic and the roof, which is melting the frost.

Should I Worry About a Lack of Frost?

If there’s a lack of frost on your roof, there could be cause for alarm. You should only worry if your neighboring houses have the same amount of sun exposure as yours. For example, your neighbor’s house might be blocked from the sun by tall trees or a taller building, while your home is in direct sunlight. As soon as the sun hits, your frost could melt away, but will remain on your neighbors due to the shade. If that’s the case, you would not need to worry.

Contacting a Roofer

If your house is not in direct sunlight, and everyone else has frost, you should contact a roofer to see if there’s a problem with your roofing and insulation. Contact Andrews Roofing by calling 757-296-0553 or emailing us today for more information.

read more

The Best Time for a Commercial Roof Replacement

Timing is important in a lot of matters, including comedy, investing, and commercial roof replacement. If you wait too long to replace your roof you could make a number of unnecessary and costly repairs. Even worse, the whole roof could come crashing down on your business. Replacing a roof when it still has good life in it is probably a foolish thing to do. So how do you know when it’s the optimal time for a roof replacement? Although a roof replacement for your business shouldn’t interrupt your operations, there may be times of the year when it is more convenient. Otherwise, the main considerations are the shape of your roof.

Choose the Perfect Time

As with other major business expenditures, there is always the question of repair versus replacement. This is a difficult question, and it’s different for each situation, but the following advice can help.

  • Consult with a qualified roofing contractor. The company can give you the benefit of its experience with roofing matters.
  • Get an inspection and a free estimate. The cost may be less than you expected and favorable financing may be available.
  • Analyze what you have been spending on roof repairs. The annual cost may be higher than what you would pay to finance a new roof.
  • Consider the benefits of a new roofing system. You would have no worries in the roof department for many years.

After consulting with a reputable roofing contractor, and crunching the numbers, you will probably have a good idea where you are. It’s possible you can put off a new roof for a couple of years, which gives you time to save and plan.

Pick the Right Company

The right roofing contractor makes the decision easier. You will get good information from a source you can trust. For assistance with commercial roofing contact Andrews Roofing by calling 757-296-0553 or emailing us today!

read more

Top Reasons Roofs Fail

When you install a new roof, the last thing that you want to happen is for the roof to fail. Unfortunately, when a contractor does a poor-quality job, this is exactly what happens. Here are some of the most common reasons for roof failure.

Poor Ventilation

Good ventilation keeps a roof in good health. You should have a ventilation system that pushes heat and moisture out during the summer. This will minimize expansion due to temperature changes. Also, it will keep your attic cool throughout the year.

Poor Installation

When it comes to home renovation, it is important that the projects are finished right. Even with the best materials, if the roof is not installed properly, it is not going to function correctly. You need to ensure that your roof is installed right the first time, by a contractor who knows what they’re doing.

Poor Quality Materials

When it comes to choosing materials, you want to take more than cost into consideration. Even if the low-cost products look appealing, you need to keep in mind that the lower costs can also mean lower quality materials. When you have high quality materials, your roof is more likely to last.

Poorly Chosen Flashing

You need to protect the protrusions where exhaust pipes, chimneys, and dormers connect to the roof. These areas are prone to leaks and other problems. Metal flashings are the best way to seal this area. You do not want to use caulk or any other type of sealant. These products degrade over time.

Roofs can fail for a number of different reasons. If you want to make sure that your roof doesn’t fail, then you’ll have to invest in regular maintenance and inspections. The higher quality the job, the more likely you are to have a roof that lasts. For a roof that will last, call a company you can trust. Contact Andrews Roofing by calling 757-296-0553 or sending us an email today!

read more

How to Maintain an Industrial Roof

When it comes to your building, there are few components as important as the roof. The roof provides safety from the elements and adds structural integrity. If you are unfamiliar with industrial roofs, you may not know the unique needs that they present. Here is what you need to know.

Semi-Annual Inspections Are Necessary

In order to maintain your roof, you need to schedule an inspection at least twice a year. In addition, you want to schedule inspections after any severe weather event. These inspections will analyze the roof and roof components’ condition, as well as leave you with a report of any problems. When you have a semi-annual inspection, you can catch problems quickly. This will provide you with the means to take care of maintenance and repairs as soon as possible.

Maintenance Is Necessary

When you neglect an industrial roof, it deteriorates quickly. As it deteriorates, it can leak and the water will damage the underlying support system, decay the structure, and harm electrical systems. The chain of events that might develop when you neglect maintenance can be severe. Some businesses can lose their inventory and equipment due to leaking water. When you own an industrial building, you have to schedule regular maintenance.

Repairs and Maintenance Are a Priority

After an inspection, it is crucial that you schedule maintenance right away. For instance, say that you have open seams or punctures. These problems increase in severity over time. You need to ensure that you take care of everything as quickly as you can. This also goes for less serious maintenance. Do not let your problem turn into something more serious.

Industrial roofs are different from residential roofs. If you are used to maintaining a residential roof, you still need to pay special attention to the unique needs of an industrial roof. For more information about your industrial roof and maintenance, contact Andrews Roofing by calling 757-296-0553 or emailing us today!

read more

How Warm Weather Affects Flat Roofs

Your building relies on the structural integrity of your roof. When it comes to roof damage, most building owners worry about extreme storm systems or snowy winters. Few regard summer as a problem to their roofing, which is a mistake. Hot summer days can negatively affect your flat roof. Here is what you need to know about warm weather and the affects it has on your roof.

Thermal Cycle Problems

In the summer, the temperatures rotate between hot and cold throughout the day and night. Flat style roofs expand and contract in these conditions. This usually leads to water penetrating the roof. You may need breathable PVC material to withstand the condensation and the thermal cycles.

Blistering Issues

When water penetrates through the roof, this is a problem on its own. It only gets worse when you add the summer heat into the mix. When you heat the moisture under the sun all day, it can lift the felt from the roof. This will lead to bubbles or blisters in the roof. If you catch these blisters as soon as possible, then you can replace the damaged sections. However, as time goes on and more blisters develop, you would need to replace the entire roof.

Moisture Damage

When moisture builds up, mold and fungus might grow. When you add sunlight into the mix, the high temperatures can help increase the rate of mold growth. This fungus may damage flashing. If you have damaged flashing, this compromises your draining capacity.

Older roofs and those that endure high temperatures should have regular inspections. When you have a roofing issue, you never want to wait around on it. Most roofing problems get worse with time, whereas maintenance may be simple and quick. With a call to Andrews Roofing today, you can avoid turning those minor problems into major problems. Call 757-296-0553 or email us today!

read more