Shingle sections on the home and pool house were GAF Hi-Def Mission Brown including metal drip edge. We installed .027 aluminum apron, step and counterflashing. Provided through brick flashing – extra care and attention was given at brick-over-roof areas to insure no water infiltration.
Snap-lock standing seam metal roof system on the home and pool house were fabricated from .032 Aluminum in Sentriclad Metal with a Dark Bronze factory applied Kynar 500 paint finish.
Curved metal drip edge and coping were installed void of kinks, ripples or relief cuts on the face of the metal.
Flat sections – installed .5″ Firestone HD coverboard insulation over wood decking. Tapered insulation was installed at areas needed to promote positive water flow. Mechanically attached Firestone 60 mil UltraPly TPO membrane over insulation. and TPO was run up side walls at a minimum of 12″. TPO coated drip edge metal was installed at roof perimeters. Deck posts and column penetrations were flashed and sealed. Aluminum cap was installed on parapet walls between the flat roof and shingled roofs.
