Leaks & Service Repairs

757-399-3066 ext 3 (Leaks & Service Repairs)

Reroof Estimates & Inspections

757-399-3066 ext 1 (Reroof Estimates & Inspections)

Day: May 21, 2014

About EPDM Rubber Roofing

EPDM rubber Ethylene Propylene Diene Monomer rubber is better known as EPDM rubber, and for many years it has been a leading type of single-ply roofing membrane. It is also used in many other applications. The appropriate use for EPDM rubber is on flat or low-slope roofs.

Most rubber roofs are black, but it does come in white to reflect the sun. White EPDM rubber membrane roofing costs a little more than black. This roof system can be mechanically attached or fully adhered and comes in reinforced and non-reinforced. There is also a less common ballasted roof system. Reinforced is used for mechanically attached, and non-reinforced is used for fully-adhered systems. Ask your roofer which one makes the most sense for your roof.

The EPDM rubber sheets come in rolls from five feet up to 50 feet wide. The sheets wider than 10 feet are for fully-adhering only, in most cases. Because covering a roof requires more than one sheet, there are seams in a rubber roof. These seams are primed and an inseam tape is installed to make them water tight. A roofer must be skilled and take extra care in properly seaming the sheets and installing rubber roof flashings.

EPDM rubber 23

Rubber roofs should last from 15 to 30 years, and manufacturers like Firestone and Carlisle guarantee them, labor and material or just the membrane. Your roofer should provide a workmanship warranty too. These membranes range in thickness from 45 to 60 to 80 and 90 mils. A mil is one one-thousandth of an inch. The most common thicknesses are 45 and 60 mil.

Contact me with questions anytime at Andrews Roofing, 757-286-7400, or at robert@andrewsroofing.com.

read more